Anthem STR Integrated Amplifier

Specification:

PHONO PREAMPLIFIER
The phono preamplifier is suitable for moving magnet and high-output moving coil cartridges

Input Impedance     100 Ω (MC), 47 kΩ (MM)
Input Capacitance     270 pF (MM)
Maximum Input (at 1 kHz for <0.1% THD 20 Hz - 20 kHz)     3.6 mV (MC), 37.7 mV (MM)
Gain (default at 1 kHz, user adjustable ± 20 dB)     55 dB (MC), 35 dB (MM)
RIAA Response     ± 0.1 dB (20 Hz to 20 kHz)
THD+N (at 1 kHz, 20 Hz - 20 kHz BW, 2 Vrms output)     0.008% (MC), 0.005% (MM)
S/N Ratio (at 1 kHz, IEC-A, 2 Vrms output)     82 dB (MC), 96 dB (MM)

PREAMPLIFIER

Frequency Response     
digital-in, 192 kHz     10 Hz - 50 kHz (+0.00, -0.50 dB)
digital-in, 96 kHz     10 Hz - 45 kHz (+0.00, -0.50 dB)
digital-in, 44.1 kHz     10 Hz - 20 kHz (+0.00, -0.03 dB)
analog-in, DSP mode     10 Hz - 40 kHz (+0.02, -0.20 dB)
analog-in, direct mode     10 Hz - 80 kHz (+0.00, -0.10 dB)

THD+N (at 1 kHz, 20 Hz - 20 kHz BW, 2 Vrms output)     

digital-in, 44.1 kHz, 0 dBFS     0.0008%
analog-in, DSP mode, 1 Vrms input     0.001%
analog-in, direct mode, 1 Vrms input     0.0020%

SNR (at 1 kHz, IEC-A, 2 Vrms output)     

digital-in, 44.1 kHz, 0 dBFS     112 dB
analog-in, DSP mode, 2 Vrms input     110 dB
analog-in, direct mode, 2 Vrms input     120 dB
Maximum Output (<0.1% THD)     2.2 Vrms except analog-direct 3.3 Vrms
XLR Configuration     Pin 1: Ground, Pin 2: Normal, Pin 3: Inverted

Powering the Future of Audio.

The revolutionary STR Integrated Amplifier is based on an entirely new technological platform, for true benchmark performance in stereo amplification. More power, more control, more connection options, and the most advanced technology available in a single, easy-to-use component.

Designed, engineered, and Crafted in Canada, the STR Integrated Amplifier combines the benefits of an advanced preamp with the power of a massive amplifier and processor. It includes leading-edge DAC, onboard Anthem Room Correction (ARC™), customizable bass manager for mono or stereo sub outs, MM and MC phono inputs—far more than the average integrated amp.

And it includes new generations of many of Anthem’s award-winning, audiophile-loving, review-praised digital signal processing innovations, delivering a noticeably higher level of audio performance realism.

This is the integrated amplifier with the power, features, connections and control to fuel your two-channel dreams, today and into tomorrow.

FEATURES & FUNCTIONS

• High-resolution preamplifier section

• High current, high output amplifier section

• Amplifier uses 8 bipolar output devices per channel, a toroidal transformer power supply, and Advanced Load Monitoring for 200W at 8 ohms, 400W at 4 ohms, 550W at 2 ohms, all continuous

• Anthem Room Correction™ to optimize in-room response

• Bass management for two subwoofers , in mono or stereo

• Up-sampling of lower-resolution sources to 24-bit / 192 kHz

• Asynchronous USB Audio Input supports 32-bit / 384 kHz PCM, and DSD 2.8 / 5.6 MHz sources

• S/PDIF coaxial and optical, and balanced AES/EBU inputs

• MM and MC phono , balanced XLR, and single-ended analog inputs

• Analog Direct mode

• Graphic Front Panel Display for easy setup navigation

• Controllable via Ethernet, RS-232, or supplied IR remote