Anthem P5 Statement Series 5 Channel Power Amplifier

Specification:

Inputs 5 Single-Ended, 5 Balanced, 1 Relay Trigger (3.5 mm Mono Jack)

Outputs 5 Pairs Speaker Binding Posts, 1 Relay Trigger (3.5 mm Mono Jack)

THD+N (225 W into 8 Ω) 0.0007% at 1 kHz, 0.008% at 20 kHz

IMD 0.00019% (CCIF, 325 W into 8 Ω)

POWER BANDWIDTH 10 Hz to 150 kHz (+0 -3 dB, 325 W into 8 Ω)

FREQUENCY RESPONSE 20 Hz to 20 kHz (+0 -0.15 dB), 5 Hz to 100 kHz (+0 -2 dB)

INPUT SENSITIVITY (RCA and XLR 0 dB inputs) 1 Vrms in for 28.3 Vrms out (100 W into 8 Ω)

INPUT IMPEDANCE 18 kΩ (RCA), 22 kΩ (XLR)

DAMPING FACTOR >600 at 20 Hz, 400 at 1 kHz (ref. 8 Ω)

S/N RATIO 125 dB, A-weighted (ref. 325 W)

CROSSTALK (between any two channels) -140 dB (20 Hz), -80 dB (20 kHz)

VOLTAGE GAIN 29 dB

SLEW RATE 40 V/µs

SWITCHES

Front Panel Power (On/Off)

Rear Panel On/Off Modes (Trigger, Manual, Auto), Inputs (RCA, XLR, XLR -6dB)

POWER OUTPUT

(Per channel, continuous RMS, 20 Hz to 20 kHz, <0.1% THD, one or all channels driven.)

Impedance 8Ω 4Ω 2Ω # of Channels Driven 1 All 1 All 1 All 325 W 325 W 500 W 500 W 675 W 675 W

Statement P2 and P5 amplifiers are stable into any impedance down to a short circuit at full output.

POWER REQUIREMENTS

SUPPLY VOLTAGE 105 to 130 V, 60 Hz

POWER CONSUMPTION 2 x 1800 W

DIMENSIONS

Height 9-3/8 inches (23.8 cm) including feet

Width Faceplate 19-1/4 inches (49 cm)

Chassis 17-1/4 inches (43.8 cm)

Depth 22-1/2 inches (57.2 cm) including handles

Weight (unpacked) 130 lb (59 kg)