Grand Prix 2015The C1100 preamplifier brings a new level of performance and luxury to McIntosh’s heralded preamplifier offerings – evidenced by its high level inputs having the lowest noise of any McIntosh preamplifier ever produced. It utilizes a two-chassis design where the control and power sections are completely separate from the audio section. Absolute isolation of a preamplifier"s two main functions – control and sound – is achieved by this unusual but effective design and will provide you with the purest sound reproduction possible for generations of listening enjoyment.
The C1100 is comprised of the C1100 Controller and the C1100 Vacuum Tube Preamplifier. Inside each, the left and right channels are electrically and mechanically isolated from each other to allow true dual mono operation - resulting in the ultimate stereo separation and sonic purity. The two units are connected together via a pair of specially designed, high performance umbilical cables that are shielded to prevent outside noise from leaking into the audio signal. While they are two separate units, when connected they act as one and are easy to control and operate from the included remote control or the C1100 Controller front panel. Both units’ chassis are comprised of polished stainless steel and hairline brushed black Titanium stainless steel, offering a new degree of richness and refinement
ELECTRONIC SPECIFICATIONS
- Number of Channels
- 2
- Total Harmonic Distortion
- High Level: 0.005%
Phono: 0.05%
- Frequency Response
- +0, -0.5dB from 20Hz to 20kHz
+0, -3dB from 10Hz to 100kHz
- Maximum Volts Out (Balanced / Unbalanced)
- 20V RMS / 10V RMS
- Sensitivity High Level (Balanced / Unbalanced)
- 900mV / 450mV
- Sensitivity Phono (Moving Coil)
- 0.45mV
- Sensitivity Phono (Moving Magnet)
- 4.5mV
- Signal To Noise Ratio (High Level)
- 107dB
- Signal To Noise Ratio (Moving Coil)
- 79dB
- Signal To Noise Ratio (Moving Magnet)
- 77dB
- Voltage Gain (High Level)
- 15dB
- Voltage Gain (Moving Coil)
- 60db
- Voltage Gain (Moving Magnet)
- 40dB
- Input Impedance (Balanced / Unbalanced)
- 50K ohms, 25K ohms
CONNECTIVITY
- Balanced Input
- 6
- Unbalanced Input
- 4
- Phono Input Moving Coil
- 1 (adjustable)
- Phono Input Moving Magnet
- 1 (adjustable)
- Upgradeable Digital Audio Module
- No
- Digital Coaxial Input
- 0
- Digital Optical Input
- 0
- Digital MCT (DIN) Input
- 0
- Digital USB Input
- 1 (for system update only)
- HDMI (ARC) Input
- 0
- Digital AES/EBU Input
- 0
- Balanced Fixed Output
- 0
- Balanced Variable Output
- 2
- Unbalanced Fixed Output
- 1
- Unbalanced Variable Output
- 1
- Headphone Output
- 1/4" High Drive with Headphone Crossfeed Director (HXD®)
Selectable headphone impedances of: 16 ohms - 40 ohms, 40 - 150 ohms, 150 - 600 ohms
- Input Level Match
- Yes, +/- 6dB
- Home Theater PassThru
- Yes
- Unbalanced Analog Connector Type
- Premium gold-plated solid brass
- Service Port
- 1
CONTROL
- Tone Controls
- No
- Tone Bypass and Input Assign
- No
- RS232 Control Input
- Yes
- Power Control Output
- 1 Main, 2 Output, 4 Trigger
- Rear Panel Data Port
- 8
- Rear Panel IR Sensor Input
- Yes
GENERAL SPECIFICATIONS
- Multi-Chassis or Single
- Multi Chassis (C1100C plus C1100T)
- Output Meters
- C1100C: No
C1100T: Yes
- Vacuum Tube or Solid State
- Tube, (6) 12AX7a and (6) 12AT7
- Power Consumption (On)
- 75 watts
WEIGHTS & DIMENSIONS
- Dimensions (W x H x D)
- Each chassis:
17.5" (44.45cm) x 6" (15.24cm) x 18" (45.7cm)
- Weight
- C1100C: 27 lbs (12.3 kg)
C1100T: 25 lbs (11.3 kg)
- Shipping Weight
- C1100C: 43.5 lbs (19.7 kg)
C1100T: 39.5 lbs (17.9 kg)