The D1100 Digital Preamplifier is a reference level stereo preamplifier and digital-to-analog converter (DAC). Its 8-channel, 32-bit DAC is used in Quad Balanced mode with half of it dedicated to the left audio channel and the other half to the right channel. It’s the most advanced DAC we’ve ever used and delivers an unprecedented level of performance so that all your digital music is reproduced with exceptional accuracy and authenticity.
Enough inputs – 9 to be exact – are included to keep even the largest digital system connected as 3 optical, 3 coaxial (2 RCA and 1 BNC), plus 1 each of MCT, AES/EBU and USB inputs are on board. The USB input accepts up to 32-bit/384kHz signals and supports DSD64, DSD128, DSD256, DXD 352.8kHz and DXD 384kHz playback1. All the other inputs accept up to 24-bit/192kHz. The MCT input is a McIntosh exclusive and allows for enjoying to the high resolution audio found on SACDs via the MCT500 SACD/CD Transport. Three sets of balanced and unbalanced stereo outputs connect the D1100 to your system. One set of outputs has fixed volume while the other 2 have variable volume; the variable outputs can also be switched on and off for additional user configurability.
ELECTRONIC SPECIFICATIONS
- Number of Channels
- 2
- Total Harmonic Distortion
- 0.0015% (at 2V Output)
- Frequency Response
- +/-0.5dB from 4Hz to 20kHz
+0.5/-3dB from 4Hz to 68kHz
- Maximum Volts Out (Balanced / Unbalanced)
- 16V RMS / 8V RMS
- Sensitivity High Level (Balanced / Unbalanced)
- N/A
- Sensitivity Phono (Moving Coil)
- N/A
- Sensitivity Phono (Moving Magnet)
- N/A
- Signal To Noise Ratio (High Level)
- 111dB
- Signal To Noise Ratio (Moving Coil)
- N/A
- Signal To Noise Ratio (Moving Magnet)
- N/A
- Voltage Gain (High Level)
- N/A
- Voltage Gain (Moving Coil)
- N/A
- Voltage Gain (Moving Magnet)
- N/A
- Input Impedance (Balanced / Unbalanced)
- N/A
CONNECTIVITY
- Balanced Input
- 0
- Unbalanced Input
- 0
- Phono Input Moving Coil
- 0
- Phono Input Moving Magnet
- 0
- Upgradeable Digital Audio Module
- No
- Digital Coaxial Input
- 3 (2 RCA and 1 BNC)
- Digital Optical Input
- 3
- Digital MCT (DIN) Input
- 1
- Digital USB Input
- 1
- HDMI (ARC) Input
- 0
- Digital AES/EBU Input
- 1
- Balanced Fixed Output
- 1
- Balanced Variable Output
- 2
- Unbalanced Fixed Output
- 1
- Unbalanced Variable Output
- 2
- Headphone Output
- 1/4" High Drive with Headphone Crossfeed Director (HXD®)
- Input Level Match
- No
- Home Theater PassThru
- No
- Unbalanced Analog Connector Type
- Premium gold-plated solid brass
- Service Port
- 1
CONTROL
- Tone Controls
- No
- Tone Bypass and Input Assign
- No
- RS232 Control Input
- Yes
- Power Control Output
- 4 Trigger
- Rear Panel Data Port
- 4
- Rear Panel IR Sensor Input
- Yes
GENERAL SPECIFICATIONS
- Multi-Chassis or Single
- Single
- Output Meters
- Yes
- Vacuum Tube or Solid State
- Solid State
- Power Consumption (On)
- 30 watts
WEIGHTS & DIMENSIONS
- Dimensions (W x H x D)
- 17.5" (44.45cm) x 6" (15.24cm) x 19" (48.3cm)
- Weight
- 26 lbs (11.8 kg)
- Shipping Weight
- 41 lbs (18.6 kg)