The MP1100 Vacuum Tube Phono Preamplifier will give vinyl lovers a new level of musical enjoyment and exhilaration. It’s filled to the brim with everything you need to not only play new records or pressings from the early days of vinyl, but it will also get every last musical note and nuance out of them – including some you may have never heard before.
The MP1100 is designed first and foremost for analog audio and achieves our most accurate equalization ever. It utilizes four 12AX7A vacuum tubes, with 2 tubes used per channel in a fully balanced configuration – making it our very first fully balanced vacuum tube phono stage. For those with multiple turntables or tonearms, there are 3 sets of RCA phono inputs; XLR connectors are also available on 1 of the inputs. All phono inputs allow for adjusting both resistance (7 settings) and capacitance (8 settings). For ease of use, it comes pre-programmed with profiles for Moving Coil and Moving Magnet cartridges as well as the McIntosh MT10 and MT5 turntables. Five additional profiles are included that are fully customizable and can be assigned to any phono input. RIAA, LP, NAB, AES and 78 analog equalization curves are included.
ELECTRONIC SPECIFICATIONS
- Total Harmonic Distortion
- Phono: 0.02%
High Level: 0.005%
- Frequency Response
- +/-0.2dB from 20Hz to 20,000Hz
+0.2, -3dB from 10Hz to 50,000Hz
- Maximum Volts Out (Balanced / Unbalanced)
- 20/10 V RMS
- Input Impedance
- Resistance: 25, 50, 100, 200, 400, 1k or 47k Ohms
Capacitance: 50, 100, 150, 200, 250, 300, 350 or 400pF
High Level (Balanced / Unbalanced): 100k Ohms / 50k Ohms
- Phono Voltage Gain
- Selectable: 40dB, 46dB, 52dB, 58dB or 64dB
- Signal To Noise Ratio
- Moving Coil: 80dB
Moving Magnet: 84dB
High Level: 118dB
- Maximum Input Signal (Moving Coil)
- 10mV
- Maximum Input Signal (Moving Magnet)
- 100mV
- Maximum Input Signal (Balanced)
- 20V
- Maximum Input Signal (Unbalanced)
- 10V
- Sensitivity Phono (Moving Coil)
- 1.25mV
- Sensitivity Phono (Moving Magnet)
- 10mV
- Sensitivity (Balanced)
- 4V
- Sensitivity (Unbalanced)
- 2V
- Rated Output
- 4V Balanced
2V Unbalanced
- Output Impedance
- 200 Ohms Balanced
100 Ohms Unbalanced
- Phono Equalization Curves
- 5: RIAA, LP, NAB, AES and 78
- Noise Filters
- 2: Rumble and Scratch
- Phono Profiles
- Pre-programmed: 4
User Programmable: 5
CONNECTIVITY
- Phono Input Moving Coil
- 0
- Phono Input Moving Magnet
- 0
- Phono Input Universal
- 3 (2 sets of RCA only inputs and 1 set of RCA or XLR inputs); each can be configured for either Moving Coil or Moving Magnet cartridges; all inputs adjustable
- Balanced Line Input
- 1 Stereo
- Unbalanced Line Input
- 1 Stereo
- Balanced Fixed Output
- 1 Stereo
- Unbalanced Fixed Output
- 1 Stereo
- Digital Coaxial Output
- 1
- Digital Optical Output
- 1
- Digital USB Audio Output
- 1
- Unbalanced Analog Connector Type
- Premium gold-plated solid brass
CONTROL
- Power Control Input
- 1
- Power Control Output
- 1
DIGITAL AUDIO SPECIFICATIONS
- Digital Output Sample Rate
- Optical: PCM - 24-bit/96kHz or 192kHz
Coaxial: PCM - 24-bit/96kHz or 192kHz
USB: PCM - 24-bit/96kHz or 192kHz
GENERAL SPECIFICATIONS
- Multi-Chassis or Single
- Single
- Output Meters
- Yes
- Vacuum Tube or Solid State
- Vacuum Tube, (4) 12AX7A
- Power Consumption (On)
- 50 Watts
WEIGHTS & DIMENSIONS
- Dimensions (W x H x D)
- 17-1/2” (44.5cm) x 6” (15.2m) x 18” (45.7cm)
- Weight
- 26 lbs (11.8 kg)
- Shipping Weight
- 40 lbs (18.2 kg)