With 200 Watts per channel, 14 inputs and a high-performance AM/FM tuner, the MAC7200 Receiver is a music lover’s dream. We’ve been making tuners since the 1950s and they are one of the hallmarks of McIntosh, with the groundbreaking MR78 FM Tuner from 1972 considered an all-time classic in the audio industry. The built-in AM/FM tuner in the MAC7200 comes from that same illustrious line of McIntosh tuners and will pick up your favorite radio stations with unparalleled clarity and a realism that is free from noise and distortion.

ELECTRONIC SPECIFICATIONS

• Power Output per Channel

  200 Watts

• Number of Channels

  2

• Speaker Impedance

  2, 4, or 8 Ohms

• Rated Power Band

  20Hz to 20kHz

• Total Harmonic Distortion

  0.005%

• Dynamic Headroom

  2dB

• Frequency Response +0,-0.5dB

  20Hz to 20kHz

• Frequency Response, +0, -3dB

  10Hz to 100kHz

• Sensitivity Phono (Moving Coil)

  0.25mV

• Sensitivity Phono (Moving Magnet)

  2.5mV

• Sensitivity High Level (Balanced / Unbalanced)

  0.5V/0.25V

• Sensitivity (Power Amp input)

  1.4V

• Signal To Noise Ratio (Moving Coil)

  80dB

• Signal To Noise Ratio (Moving Magnet)

  82dB

• Signal To Noise Ratio (High Level)

  95dB

• Signal To Noise Ratio (Power Amp input)

  113dB

• Input Impedance (Balanced / Unbalanced)

  20K/20K

• Damping Factor

  >40

• Maximum Output (Balanced / Unbalanced)

  8V Unbalanced

CONNECTIVITY

• Balanced Input

  1

• Unbalanced Input

  5

• Phono Input Moving Coil

  1 (adjustable loading)

• Phono Input Moving Magnet

  1 (fixed loading)

• Upgradeable Digital Audio Module

  Yes: DA1

• Digital Coaxial Input

  2

• Digital Optical Input

  2

• Digital MCT (DIN) Input

  1

• Digital USB Input

  1

• Balanced Variable Output

  0

• Unbalanced Fixed Output

  0

• Unbalanced Variable Output

  2

• Headphone Output

  1/4" High Drive with Headphone Crossfeed Director (HXD®)

• AM/FM Tuner option

  Included

• Home Theater PassThru

  Yes

• Unbalanced Analog Connector Type

  Standard

• Speaker Binding Post Type

  Standard

• Service Port

  1

DIGITAL AUDIO SPECIFICATIONS

• Digital-to-Analog Converter (DAC) Type

  8-channel, 32-bit/384kHz PCM/DSD, Quad Balanced

• Digital Coaxial Input Sample Rate

  24-bit/44.1kHz to 192kHz

• Digital Optical Input Sample Rate

  24-bit/44.1kHz to 192kHz

• Digital MCT (DIN) Input Sample Rate

  16-bit/44.1kHz (CD)
  DSD64 (SACD)

• Digital USB Input Sample Rate

  32-bit/44.1kHz to 384kHz (PCM)
  DSD64, DSD128, DSD256, DXD352.8kHz, DXD384kHz

FM GENERAL SPECIFICATIONS

• FM Tuning Range

  87.9MHz - 107.9MHz (USA)
  87.5MHz - 108.0MHz (Europe)
  76MHz - 90MHz (Japan)

• FM Channel Spacing

  200kHz (USA)
  50kHz (Europe50)
  100kHz (Europe100, Japan)

• FM Antenna Input

  75 ohms, Type “F” Coax connector

FM ANALOG SPECIFICATIONS

• Useable Sensitivity

  2.2uV (18.1dBf)

• 50dB Quieting Sensitivity

  1.5uV (14.8dBf)

• Signal To Noise Ratio

  Mono: 70dB
  Stereo: 68dB

• Frequency Response

  ±1dB 20Hz to 15,000Hz

• Total Harmonic Distortion

  Mono: 0.4%
  Stereo: 0.8%

• Channel Selectivity

  60dB Adjacent Channel
  66dB Alternate Channel

• Stereo Separation

  38dB

AM GENERAL SPECIFICATIONS

• AM Tuning Range

  530kHz - 1720kHz (USA)
  522kHz - 1602kHz (Europe)
  522kHz - 1611kHz (Japan)

• AM Channel Spacing

  10kHz (USA)
  9kHz (Europe, Japan)

• AM Antenna Input

  Balanced, RJ45 connector (for use only with supplied McIntosh RAA2 Remote AM Antenna)

AM ANALOG SPECIFICATIONS

• Selectivity

  45dB Adjacent Channel

• Signal To Noise Ratio

  50dB

• Frequency Response

  0dB, -6dB 50Hz to 3,000Hz

• Total Harmonic Distortion

  0.5%

• Sensitivity

  350uV/m

CONTROL

• Tone Controls

  Bass and Treble

• Tone Bypass and Input Assign

  Yes

• RS232 Control Input

  Yes

• Power Control Output

  1 Main, 2 Trigger

• Rear Panel Data Port

  4

• Rear Panel IR Sensor Input

  Yes

• Input Level Match

  Yes

GENERAL SPECIFICATIONS

• Vacuum Tube or Solid State

  Solid State

• Output Type

  Autoformer™

• Output Meters

  Yes

• Dual Layer Chassis

  Yes

• Chassis Finish

  Black painted steel

• McIntosh Monogrammed Heatsinks™

  Yes

• Power Requirement

  120V 50/60Hz, 4.4 amps

• Standby Power Requirement

  <0.25 Watts

WEIGHTS & DIMENSIONS

• Dimensions (W x H x D)

  17-1/2" (44.45cm) x 7-5/8" (19.37cm) x 22" (55.88cm)

• Weight

  75 lbs (34.1 kg)

• Shipping Weight

  93 lbs (42.3 kg)