The Ultra high performance Dream V12 AC power cords are very thick (approximately 40mm in diameter - thicker, than the Dream and the Dream V10 cords), but still flexible.

Unlike the Dream and the Dream V10 cords, the Dream V12 conductive material is unplated, double-insulated oxygen-free copper

The Dream V12 UNI is a user-configurable cord, with fine-tuning feature (tonality change by moving a special “magnetic field shorting” collar along the cable)

The user is able to configure the Dream V12 UNI as Digital, or Wall /Preamp, or Power – by himself;

Thus, there is only ONE type of the Dream V12 UNI cord – user  (or dealer) configurable as Power, Digital, Wall or Preamp;

But there are FOUR versions of the standard Dream V12 cords: WALL, Preamp, Power and Digital (same four versions as for the Dream and the Dream V10 cords)

Both the wall plug and the IEC end are an integrated part of these cords - which helps the acclaimed excellent performance of the Dream cords, but creates a problem with changing the plugs. The Carbon fiber shells are permanently glued to the cords. Inside the shell, there is a precision machined collet, which mechanically holds the cord inside the shell, to prevent stressing the glued joint.

No dealer and no other cable making company (and certainly not a handy individual) can possibly replace or change a wall plug or an IEC receptacle on a STEALTH Dream AC cord (any revision). It is a complex and labor intensive procedure, and thus it can only be done here, in the USA, at our facility, by a specially trained technician. The only way is to cut the end completely off, re-strip the ends of individual wires, refill the cable core with Helium, seal it, and install a new plug.

The four types of Dream V12 STANDARD cords are similar, but NOT THE SAME: they have the same AC carrying multipath *** (multiple groups of wires, STEALTH  proprietary configuration), but the ground layout and ground filtering is type-specific, and thus each Dream V10 AC cord has its type printed on its carbon shell, plus all four types are individually color-coded to avoid  confusion.

Dream V10 Preamp (black with blue stripes) - for preamplifiers

Dream V10 Digital (black with gold stripes) - for digital gear (CD players and transports, digital processors and AD and DA converters, digital and class-D power amplifiers)

Dream V10 Power (black with FIVE silver stripes) - for analog power amplifiers, turntable motors

Dream V10 Wall (black with TWO silver stripes) - for AC power conditioners and AC power strips

The Dream V12 color coding for the WALL, Preamp, Power and DIGITAL version of the Dream V12 cords are shown and are the same as for the previous Dream AC cords revisions.